Drilling For Gas.com
  • Home
  • Drilling
    • Standards
    • Hole Problems
    • Directional
    • Rig Move
    • Calculations (Excel)
    • Slim Hole
    • Offshore
    • Misc. (Drilling)
  • Well Control
    • Planning
    • Primary Control
    • Secondary Control
    • Tertiary Control
    • Equipment
  • Checklists
    • Pre-spud
    • Drilling
    • Casing
    • Cementing
    • Completion
    • Misc. Checklists
  • Casing
    • Casing Types
    • Load Cases
    • Preliminary Design
    • Special Design
    • Connections
    • Corrosion, Wear, Fatigue
    • Casing Operations
  • QHSE
  • Production
  • Completion
    • Design
    • Operations
    • Equipment
    • Misc. Completion
  • Evaluation
    • Coring
    • Logging
    • Mud Logging
    • Well Testing
    • Mics. Evaluation
  • Planning
  • Driling Fluids
    • Mud Types
    • QA QC
    • Testing
    • Solids Control
    • Losses
    • Contamination
    • Misc. Drill Fluids
  • Cementing
    • Planning
    • Casing
    • Cement Plugs
    • Evaluation
    • Remedial

Most Read

  • Calculation of Maximum Allowable Annular Surface Pressure (MAASP)
  • Casing Make-Up Torque
  • HSE Plan (Example)
  • Basics of Electric Wireline Logging
  • Pressure Testing Standards
  • Drilling safety guidelines
  • Tripping Operations - Best Practices
  • Well Control Standards
  • Classification of BOP and well control equipment.
  • Sub-surface safety valves (SSSV)
  • Waste Management Strategy - cuttings discharge

Latest

  • Completion Operation - Best Practices
  • Drilling programme 12.25" section HPHT
  • Cold Weather Operations Checklist
  • Coring Checklist
  • Weatherford Overdrive casing running and pick up/lay down machine - Checklist
  • 16" Potential Problems - Best Practices
  • 12.25" guidelines for tripping, making connections and back reaming
  • 9 5/8" Wellhead and BOP Operations Checklist
  • Drilling program example (Semi-Sub)
  • Survey and Collision Avoidance Standards
  • Operation Programmes Standards
  1. You are here:  
  2. Drilling
  3. Directional
Articles
Surveying Wells with No Anticipated Well Control Problems
Best Practices for Running Recoverable Survey Instruments
Conventional multi-shots magnetic survey tools: Pre-survey checklist & Running procedure
Wireline Surveying Techniques
Surveying Wells with Anticipated Well Control Problems
Survey evaluation
Running procedures for solid state magnetic multi-shot directional survey tools
Magnetic Multi-Shots
Correction for Magnetic Azimuths
Survey policy
Introduction to Magnetic Surveys
Data Recording for Horizontal and ERD wells
Surveying Responsibilities
Declination and Grid Convergence Definition
Survey program and report
Well Plots
Directional Drilling Planning
Kick-off and Initial Build Section
Wireline steering techniques
Directional Surveying Standards
Slim hole, coiled tubing and under-balanced drilling surveying
Steerable Systems
Surveying definitions
Gyro Surveys - QA/QC
Electronic Magnetic Multi-Shots
Solid state magnetic survey tools
Gyro Multi-Shots
Teledrift - Inclination-only MWD
Measurement While Drilling (MWD) General Guidelines
Inertial Navigation Survey Systems
Measurement While Drilling (MWD) Tool
Tie-In Data
Guidelines for Rotary Directional Drilling
Conventional magnetic single-shot survey tools: Pre-survey checklist and Running procedures
Survey Programme Example
Conventional magnetic survey tools
Positional Uncertainty
Gyro Single Shots
Directional drilling plan with 12.25" pilot hole, 22" hole hole opener and 24" underreamer
BHA Components and Inspections
Directional drilling plan with hole opener and under-reamer
Bit Selection and Hydraulics
Magnetic surveying techniques
North Seeking gyro - Common tools description
Correction programmes for magnetic survey
Wellpath planning and anti-collision monitoring - COMPASS
Magnetic Single Shots
Survey tools and techniques
Horizontal well surveying
Directional Drilling Responsibilities
Directional BHA considerations
Conventional gyro: pre-survey checklist and running procedure
Directional Drilling Exercices
Non-Magnetic Drill Collars
North seeking gyro survey tools
Measurement While Drilling (MWD) - QA/QC
Survey Programme
Borehole representation
Conventional Gyroscopic Survey Tools
Introduction to Gyro Surveys
Definition of Surveying Terms
Measurement while drilling (MWD) - Introduction
Single-shot inclination-only survey tools (TOTCO)