This article provides cable and weak strength for Schlumberger and Baker Atlas
Logging Cables And Weak Points - Schlumberger
CABLE DIAMETER WT/FT BREAK. STRAIN
(INS.) (LBS) (LBS)
_______________________________________________
7 - 46 15/32" 0.330 16,000
7 - 46V 15/32" 0.330 16,700
1 - 22 7/32" 0.080 5,100
CABLE WEAK BREAKING STRAIN
POINTS (LBS)
______________________________________________
Strong 5,450 - 6,900
Standard 4,800 - 5,400
Deep Well 3,500 - 4,400
Note: For cables that are not new, the breaking strain will be lower than the quoted values. Thus 50% of the new cable breaking load is the maximum that may be pulled without consulting the Base.
Logging Cables And Weak Points - Atlas Wireline Services
CABLE DIAM. WT/FT BREAKING MAX. REC.
(INS.) (LBS) STRAIN(LBS) PULL (LBS))
___________________________________________________________
Multi-conductor:
7H464G 15/32"(0.462) 0.343 17,000 11,340
7H314A 5/16"(0.323) 0.181 9,500 6,365
Mono-conductor:
1H220A 7/32"(0.223) 0.093 5,000 3,350
1H181A 3/16"(0.185) 0.064 3,600 2,400
CABLE WEAK STRANDS NOMINAL NORMAL
POINTS STRENGTH LIMIT(LBS)
___________________________________________________________
Multi-conductor:
7H464G STUD - 6,000 3,800
7H314A STUD - 3,000 2,000
Mono-conductor:
1H220A CABLE 7 1,323 886
1H181A CABLE 6 1,062 711
___________________________________________________________
Note: For cables that are not new, the breaking strain will be lower than the quoted values. Thus 50% of the new cable breaking load is the maximum that may be pulled without consulting the Base.