SAFETY

Y / N

Fire fighting equipment in place & tested

 

Emergency showers, eyewash stations & P.P.E in good condition

 

All equipment connected to earring system

 

Dangerous chemicals separated & warning signs posted

 

Safety signs posted at entrance of location & at relevant areas

 

 

 

General

 

Diesel sufficient

 

Rig water sufficient

 

Camp water sufficient

 

Spud mud ready

 

Cement on location

 

Cement line installed C/W safety wire

 

Is rig site housekeeping good?

 

When was last rig site safety meeting – daily?

 

Are no smoking signs displayed?

 

Are gas cylinders correctly racked?

 

 

 

Drill Floor

 

Is housekeeping good?

 

Is floor in good condition?

 

Are there tripping hazards?

 

Are all railings secure and straight?

 

Are all railings in place?

 

Is V-door barred when not in use?

 

Is there a mouse hole cover?

 

Is there a rotary hole cover?

 

Is there a first floor aid kit on the drill floor?

 

Is there eyewash on the drill floor?

 

Is all drill floor instrumentation working correctly/

 

When were emergency cut-out switches last tested? (Date)

 

Are winch wires in good condition?

 

Are winch brakes in good condition?

 

Are winch wires clear of derrick?

 

Are winch drums guarded?

 

Are cable clips installed correctly?

 

 

 

Derrick

 

Are all mast and substructure pins installed?

 

Are there any damaged members?

 

Are all ladders in good condition?

 

Are there safety cages / devices?

 

Has monkey board been inspected?

 

Has stabbing board been inspected?

 

Are all winch sheaves in good condition?

 

Do they have safety lines?

 

Is derrick lighting adequate?

 

Are lights secured and do they have safety wires?

 

Is there a derrick man’s escape line?

 

When was it last inspected / tested / cleaned? (Date)

 

Are kelly spinner hoses snubbed?

 

Kelly spinner working properly

 

Are rotary hoses snubbed?

 

Geolograph line hooked up?

 

 

 

Mud Tanks

 

Are grating is good condition?

 

Are there gaps in grating?

 

When gratings are removed is area roped off?

 

Are ladders in good condition?

 

Are railings secure with no gaps?

 

Is all moving machinery guarded?

 

Is eye protection available?

 

Is eye wash available?

 

All solids control equipment tested

 

Shaker screens installed

 

L.P. mud system complete and tested

 

Degasser test run

 

 

 

Mud Pumps

 

Are there covers over pistons?

 

Are relief lines secured?

 

H.P. mud system complete and pressure tested

 

H.P. mud lines snubbed

 

Cellar jet installed and tested

 

 

 

Engines

 

Are all elec. Switchboards covered and locked?

 

Is there easy access to emergency switches?

 

Are electric cables protected?

 

Diesel systems checked for leaks

 

 

 

Tongs

 

Is breakout wire in good condition?

 

Is make-up chain in good condition?

 

Are back-up wires in good condition?

 

Are tong dies in good condition?

 

Do counter balances move freely?

 

Are suspension wires in good condition?

 

Are cable clips correctly installed?

 

 

 

Slips and Elevators

 

Are slip dies in good condition?

 

Are slip handles in good condition?

 

Do all elevators open / close easily?

 

Are all pins & latches in good condition?

 

 

 

Drawworks

 

Is brake correctly adjusted?

 

Are rims and pads in good condition?

 

Crown-o-matic tested?

 

All clutches & controls working properly

 

 

 

Blockline

 

Is blockline in good condition?

 

Can fast line interfere with derrick?

 

Can dead line interfere with derrick?

 

Is dead line anchor in good condition?

 

Is line clamp in good condition?

 

When were bolts last checked tight? (Date)

 

Is sensor adjusted correctly