The following procedure should be used when making up a weight set tie-back packer with a 7in liner.
1. PICK UP weight set tie-back packer c/w setting sleeve and PBR 9.5/8in, 43.5-53.5 lbs/ft x 7in 23-32 lbs/ft L-80.
2. PICK UP liner running tool, type 2RH with PBR seal assembly 4.1/2 IF box up (installation to be performed on rig site by Liner Service Company with assembly in vertical position).
3. CHECK tie-back packer internally and externally, CHECK conditions of seals.
4. CHECK calliper of the tie-back packer for correct OD/ID.
5. MEASURE length of each component and note them on the casing tally list.
6. CHECK running tool internally and externally, CHECK pack-off seals and running nut, MEASURE adjustment stand off.