This document details the minimum standards for carrying out a rig move. 1. INTRODUCTION 1. Each move shall be covered by a specific procedure agreed by all parties. 2. The rig move procedure or programme should be prepared by the contractor, wherein for offshore operations it is to be prepared by the contractor Tow Master … Rig Move – Standards

This Standard provides a list the approvals and documentation required before commencement of operations. Prior to commencement of operations the following documents/approvals shall be at the location: 1. Rig acceptance report 2. An approved Well Operations Programme 3. Emergency Response Plan including BOCP (Blow Out Contingency Plan) 4. A Well Control Procedure (this may be … Approval to commence operations – Standards

This document provides the minimum standard for drill string management 1. REFERENCES API Specification 5DP/ISO11961: Specification for Drill Pipes API Specification 7-1/ISO10424-1: Specification for Rotary Drill Stem Elements T.H. Hill Standards DS1: Drill Stem Design and Inspection API Specification 7-2/ISO10424-2: Specification for threading and gauging of rotary shouldered threaded connections 2 GENERALITIES 1. All Drill … Drill String and BHA Management Standards

1 SCOPE This document provides the minimum requirements to carry out simultaneous operations. 2 REFERENCES not applicable 3 OPERATING PHILOSOPHY 3.1 COMBINED INSTALLATION Installations, comprising a rig, platform and/or production facility, become combined when they have or will have an interface, e.g. emergency shut-down, deluge system, PA system, etc. 3.2 SIMULTANEOUS OPERATIONS 1. Simultaneous Operations … Simultaneous Operations Standards

This document defines the primary responsibilities of key personnel involved in Well Operations. 1. GENERAL RESPONSIBILITIES At all times and through all projects, the Company Well Construction Management Process and associated Completion, Construction, Drill Stem Test and Intervention Process shall be implemented. It remains the responsibility of Company Well Operations Managers to implement and guide … Well Operations Management Standards

This document provides completion design standards and requirements and specifies general practises that facilitate efficient and reliable completion design. GENERAL The completion shall be designed to produce safely and economically effluent to surface. In completion design, simplicity is synonymous with reliability. WELL INTEGRITY Well integrity is the application of people, equipment and processes throughout the … Completion Standards

This document describes the minimum standards and general practices for abandoning wells. 1. Abandonment or Temporary Suspension shall ensure that: Abandonment of the wells shall be designed and conducted in such a way that the environment is preserved and protected permanently. 2. Flow from the formation fluid to surface is prevented. 3. Permeable zones are … Abandonment Standards

This document provides the outline of the minimum requirements for a rig to be accepted for operations on a well location. A rig can be a drilling or work-over rig, snubbing unit, coil-tubing unit, wire-line rig or pulling rig. GENERAL 1. A detailed rig acceptance procedure shall be included in any Call for Tender and … Rig Acceptance Standards

This docuemnt defines the general responsibilities and requirements for ensuring safe working conditions. The Well Operations Manager covers Drilling, Completion and work-over, as well as any intervention where the production tree has to be removed or where a heavy equipment is used such as Pulling units, Coiled tubing, snubbing units. 1 WELL OPERATIONS MANAGER 1. … Safety Management Standards

Minimum standards, which must be complied with and specifies general practices that enable the planning, safe and successful execution of coiled tubing operations. PLANNING 1. Coiled tubing operations on live wells need a very thorough preparation and essential parameters have to be taken into consideration during the preparation. 2. Last drift run done in the … Coiled Tubing Standards