• Drilling program example (Semi-Sub)
• Pressure Testing Standards
• Shallow Draft Jack-Up
• Semi-Submersible
• Depth Referencing
• Single-shot inclination-only survey tools (TOTCO)
• Swamp Barge (With Optional Submerged Caissons)
• H2S Standards
• Rig Move - Standards
• Well Control Standards
• Standard Jack-Up
• Cantilever Drilling Barge
• Steel Caisson and Drilling rig
• Measurement while drilling (MWD) - Introduction
• Land rig on barge (with optional submerged caissons)
• Land rig on artificial island (shallow water)
• Modularised and Pile Elevated Drilling Rig
• Submersible drilling rig
• Heli-Rig
• Mud Compressibility Calculation
• Stuck Pipe - Free Point Determination
• Acronyms and Abbeviations
• Drill Pipe String Design (example)
• Tripping Procedure in tight hole
• HPHT Drilling Procedures
• Fishing with Overshots
• Fishing Tools: Drilling/ Fishing Jars,Accelerators, Bumper Subs
• HPHT Wells - Standards
• Rig Acceptance Standards
• Wellheads and Xmas Trees Standards
• Drilling programme 12.25" section HPHT
• Abandonment Standards
• Sidetracking out of Casing with Whipstock
• Definition of Surveying Terms
• Operations with Mud Cap Drilling (MPD, Managed Presure Drilling)
• Survey and Collision Avoidance Standards
• Simultaneous Operations Standards
• Slim hole Wells - Overview
• Offshore Rig Moves
• Equivalent Circulating Density (ECD) Calculation
• Back-Off Procedures
• Sidetracking Guidelines
• Hole Cleaning Tips
• Milling Guidelines
• Rig Move Planning (Safety and Review)
• Stand-by vessel duties, equipment and standards
• Fishing Assemblies and tools
• Borehole representation
• Mechanical Sticking (cause of stuck pipe)
• Slim hole Drilling Techniques
• Barriers Standards
• Final / End of Well Report
• Stuck Casing - Remedial Action
• Introduction to Gyro Surveys
• Conventional Gyroscopic Survey Tools
• Drill String and BHA Management Standards
• Completion technology for Slim hole wells
• Survey Programme
• Operation Programmes Standards
• Onshore Rig Move Plan - Table of Content
• Drill string vibrations
• Abandonment and sidetrack drilling programme
• Coiled Tubing Standards
• Non-Magnetic Drill Collars
• Jarring Stuck Pipe
• Pulling Stuck Pipe
• Kick Tolerance Calculation
• Wellpath planning and anti-collision monitoring - COMPASS
• General Guidelines for Sidetracking
• BOP Accumulator Capacity Calculation
• Shallow Gas Standards
• Wireline steering techniques
• Spotting Fluids to Free Stuck Pipe
• Testing Standards
• North seeking gyro survey tools
• Jacket Supported “Offshore’’ Rig
• Measurement While Drilling (MWD) - QA/QC
• Drilling Fluids Standards
• Dailly Drilling Report Standards
• Geology, Logging, Mudlogging & RTC - Standards
• Preventing Differential Sticking
• Use of Drag charts for hole cleaning - WellPlan
• HPHT procedures
• Freeing Differentially Stuck Pipe
• Offshore Rig Moves Planning and Preparation
• Conventional gyro: pre-survey checklist and running procedure
• Backing-off procedure with top drive
• Responsibilities during offshore rig moves
• Conversions factors
• Well Operations Management Standards
• Drilling Programme - Preparation and Content
• Taper Mills
• Mud Rheology Calculation
• Fishing with Spears
• Drilling Standards
• Ingram Cactus: Exact 15 Universal Slim-hole wellhead system
• Horizontal well surveying
• North Seeking gyro - Common tools description
• Planning requirements for Managed Pressure Drilling (Mud Cap)
• Sequence of Operations - Typical Onshore Well
• Fishing with Washover Strings
• Total Flow Area Calculation
• Fishing Guidelines
• Cuttings Slip Velocity Calculation
• Mechanisms of rock cutting
• Fishing Planning and Preparation
• Incident Reporting Standards
• Completion Standards
• Slim hole well wireline logging
• Minimum Flow Rate for Hole Cleaning Calculation
• Magnetic surveying techniques
• Magnetic Single Shots
• Rig Team HPHT Checklists
• Junk Mill
• Tripping - Standards
• Survey tools and techniques
• Surveying requirement for exploration well
• Fishing tools selection
• Stuck Pipe Prevention
• Directional Drilling Exercices
• Correction programmes for magnetic survey
• Fishing in slim hole wells
• BHA Components and Inspections
• Directional BHA considerations
• Drilling Rig on Pre-Installed Piles and Modules for shallow water depth
• Drillpipe and Bottom Hole Assembly - Standards
• Jarring precautions
• Wireline Surveying Techniques
• Cementing Standards
• Fracture Gradient Calculation
• Conventional magnetic survey tools
• Pilot Mill
• Well Planning Information Sheet
• Responsibilities during drilling operations
• Whipstock Milling Operation - Best Practices
• Differential Sticking (Cause of Stuck Pipe)
• Conventional magnetic single-shot survey tools: Pre-survey checklist and Running procedures
• Diving operations in exploration drilling
• Posted Barge With Land or Modular Drilling Rig
• Surveys required before rig move - Offshore
• Critical Rotary Speed Calculation - Drill Pipe and Drill Collar
• Types of vessel, offshore support
• Rig Move Dailly Report (Onshore and Ofshore)
• Standard Drilling Tools
• Miscellaneous Fishing Tools
• Coring Standards
• Gyro Surveys - QA/QC
• Inertial Navigation Survey Systems
• Overpulls/ Stuck Pipe In Surface Hole
• Directional Drilling Responsibilities
• Teledrift - Inclination-only MWD
• Sequence of Operations - Typical Offshore Well
• Drill string design (slim hole wells)
• Problems encountered in drilling extended reach and horizontal wells
• Safety Management Standards
• Casing, liners and cementing for Slim Hole Wells
• Measurement While Drilling (MWD) Tool
• Site Preparation for Land Wells
• Directional drilling plan with hole opener and under-reamer
• BP Well Control Toolkit
• Gyro Single Shots
• Offshore Rig Move Plan
• Directional drilling plan with 12.25" pilot hole, 22" hole hole opener and 24" underreamer
• Hole Cleaning
• Solid state magnetic survey tools
• Chemical Cutters for Stuck Tubing or Drillpipe
• Gyro Multi-Shots
• Guidelines for Site Survey/ Hazard Requirements for Drilling Units
• Fishing with Junk Retrievers
• Wellheads, Xmas trees and BOPs for Slim Hole Wells
• Bit Selection and Hydraulics
• Multilateral drilling programme
• Production testing - Slim Hole Wells
• Survey Programme Example
• Measurement While Drilling (MWD) General Guidelines
• Backing off Procedures
• Continuous coring method - Slim Hole Wells
• Environmental impact of Slim Hole Drilling
• Mud cooler for HPHT wells
• 8.5" Section Drilling Programme HPHT
• Surveying definitions
• Rigs for Slim Hole Drilling
• Guidelines for Rotary Directional Drilling
• Steerable Systems
• Cooper Oil Tools: MC2 compact wellhead
• Directional Surveying Standards
• Abandonment guidelines
• Fishing with Junk Subs
• Responsibiliites for Rig Move, Site Preparation and Site restoration
• Slim hole, coiled tubing and under-balanced drilling surveying
• Drilling Unconsolidated Formations
• Onshore Rig Moves - Well Status
• Pipe Sticking
• Pressure Losses Hydraulics Calculation
• Mangement of Change Standards
• Downsized conventional drilling - Slim Hole Wells
• Positional Uncertainty
• List of companies - Slim Hole Wells services
• Burst Pressure vs. Wear (remaining wall thickness)
• Well control for slim hole wells
• Pressure in Gas Column Calculation
• Rig Move Inspection Requirements (Onshore Operations)
• Electronic Magnetic Multi-Shots
• Magnetic Multi-Shots
• Declination and Grid Convergence Definition
• Conventional multi-shots magnetic survey tools: Pre-survey checklist & Running procedure
• Changing a Bottom Hole Assembly
• Responsibilities during Fishing Operations
• Well Plots
• Survey program and report
• Truck Driver Rig Move Toolbox Meeting
• Vibration minimisation for conventional Slim Hole Drilling
• Introduction to Magnetic Surveys
• Lost Circulation
• Running procedures for solid state magnetic multi-shot directional survey tools
• Stretch graph for 3.5" and 5" Drilll Pipe
• Coring in Slim Hole Wells
• Data Recording for Horizontal and ERD wells
• Kick-off and Initial Build Section
• Approval to commence operations - Standards
• Historical problems with slim hole drilling
• Directional Drilling Planning
• Formation Instability
• Effective Pull On Stuck Pipe
• Tie-In Data
• Survey evaluation
• When to Give Up Attempts to Free the Pipe
• Site Restoration
• Surveying Wells with Anticipated Well Control Problems
• Muds, hydraulics and lost circulation for Slim Hole Drilling - downsized conventional drilling
• Responsibilities for Abandonment
• Surveying Responsibilities
• Underreaming
• Mechanical power to the bit / corehead
• Minimum safety stock for HPHT operations
• Best Practices for Running Recoverable Survey Instruments
• How to avoid Hole Related Problems
• Baryte plugs to cure losses
• Abandonment programme - oil producer
• Surveying Wells with No Anticipated Well Control Problems
• Correction for Magnetic Azimuths
• Muds, hydraulics and lost circulation for Slim Hole Drilling - Continuous coring
• Vibration minimisation for continuous coring in Slim Hole Drilling
• Survey policy
• Lost Sidewall Sample Bullets
• Surveying Slim Hole Wells
• Evaluation of slim hole wells